fbpx
Blog

See the latest Swoop blogs & updates

BYO Modem – Telstra Smart Modem GEN -1 (DJA0230) (Fibre to the Node/Building)

Default IP 10.0.0.138 or 192.168.0.1 or 192.168.1.1
Default Login Usernameadmin
Default Login Password<blank> -or- Telstra -or- telstra
WiFi Details802.11b/g/n 2.4GHz802.11a/n/ac 5GHz
Ethernet Details1x 1000Mbps WAN port
4x 1000Mbps LAN ports
CompatibilityAll NBN and Fixed Wireless for up to 1000 Mbps connection
Modem Setup with Swoop
In most cases, your modem should automatically get configured with Swoop, because to make it easier for our customers we support both IPoE (Dynamic) and Flexible PPPoE connection for NBN services. As long as your modem is in either of those modes, it should just work (regardless of PPPoE username and password stored in your modem).

However, if automatic setup didn’t not work you, please follow below modem setup instructions.

STEP 1 – Find the Phone Socket

There are 2 types of Phone socket

  • Normal Phone Socket
  • Older Style Phone socket (Sometimes may need to buy a “Modular Telephone Adaptor Plug” if its missing)

Please note, FTTN/B does not require any filter.

New Phone socketOlder Style Phone Socket

STEP 2 – Connect the Modem to the Telephone Socket

One end of the phone cable goes to the telephone socket on the wall and other end goes to the DSL port (grey) of the modem. 

Please note, it is recommended to use normal 1m long cable, longer cable can cause problems.

STEP 3 – Ensure you have “Sync

You can check via Link light on modem (Solid Green)

STEP 4 – Connect a device to your modem

Ensure the modem is connected to a device such as laptop, tablet, or phone etc. via Ethernet or Wi-Fi.

Default Wi-Fi password is located on your modem sticker.

STEP 5 – Login to your modem

Now open any browser (Chrome, Edge or Safari) and type 10.0.0.138 and press enter.   If you are unable to access your modem page, please try either 192.168.0.1 or 192.168.1.1.

Now you’ll be greeted with login screen, default username is admin and default password are either <blank> -or- Telstra -or- telstra

STEP 6 – Setting up Connection

Swoop supports both IPoE and PPPoE authentication for all NBN services 🙂

Setup as IPoE (Dynamic)Setup as PPPoE
Connection mode is VDSL or VDSL 2

– Go to Broadband
– Select connection type as IPoE
– Click Save

Modem will now restart and get configured with Swoop within 5 minutes. Reboot the modem manually if required

Connection mode is VDSL or VDSL 2
 

– Go to Broadband
– Select connection type as PPPoE
– Type in PPPoE username + password under
– PPPoE Settings section
– Click Save

Modem will now restart and get configured with Swoop within 5 minutes. 
Reboot the modem manually if needed


Physical Buttons

ButtonDescription
Wi-Fi On/Off buttonPress to turn both 2.4GHz and 5GHz Wi-Fi on or off.
Power buttonToggles the power on and off.
ResetFactory Reset Pinhole

Find answers instantly.

Support Center