fbpx
Blog

See the latest Swoop blogs & updates

BYO Modem – Netcomm NF10 WV – Fibre to the Node/Building

Default IP 192.168.20.1
Default Login Usernameadmin
Default Login Passwordadmin
WiFi Details802.11b/g/n 2.4GHz
Ethernet Details1x 1000Mbps WAN port
4x 100Mbps LAN ports
CompatibilityAll NBN and Fixed Wireless for up to 100 Mbps connection
Modem EmulatorNF10WV Emulator
Modem Setup with Swoop
In most cases, your modem should automatically get configured with Swoop, because to make it easier for our customers we support both IPoE (Dynamic) and Flexible PPPoE connection for NBN services. As long as your modem is in either of those modes, it should just work (regardless of PPPoE username and password stored in your modem).

However, if automatic setup didn’t not work you, please follow below modem setup instructions.

Locate your Phone Socket

There are 2 types of Phone socket

  • Normal Phone Socket
  • Older Style Phone socket (You may need a modular adaptor, if it’s not present in your home)

Please note, FTTN/B does not require any filter

New Phone socketOlder Style Phone Socket

Connect the Modem to the Telephone Socket

One end of the phone cable goes to the telephone socket on the wall and other end goes to the DSL port (grey) of the modem. 

Please note, it is recommended to use normal 1m long cable, longer cable can cause problems.

Ensure you have “Sync”

You can check via WAN/DSL light on modem (Solid Green)

Connect a device to your modem

Ensure the modem is connected to a device such as laptop, tablet, or phone etc. via Ethernet or Wi-Fi.

Default Wi-Fi password is located on your modem sticker.

Login to your modem

Now open any browser (Chrome, Edge or Safari) and type 192.168.20.1 and press enter. 

Now you’ll be greeted with login screen, default username is admin and default password is the word password.

If you have set a custom password, they need to enter that. If you do not remember it, you can factory reset the modem and then login via default credentials. 

Setting up Connection

Step 1: Click on the Basic Setup menu item on the left side of the screen

Step 2: Select VDSL and click Next 

Step 3:

  • For IPoE (Dynamic) Setup select IP over Ethernet (IPoE)
  • For PPPoE Setup select PPP Over Ethernet (PPPoE) with no VLAN tag
  • Click Next

Step 3.1 For PPPoE Setup only (for IPoE setup, skip this step)

  • Enter your username and password
  • Click Finish

Step 4: Select Obtain an IP address automatically and click Next

Step 5: Click Apply/Save

Now modem will reboot and can take up to 5 minutes to setup.

Physical Buttons

ButtonDescription
WPS buttonWPS button
Wi-Fi On/Off buttonPress to turn both 2.4GHz and 5GHz Wi-Fi on or off.
USBConnect an external USB hard drive here to use the NAS feature of the NF10WV.
Power buttonToggles the power on and off.

Find answers instantly.

Support Center